Skip directly to content

News

Read About the Latest Company News, Case Studies, Product Launches and More

Excavator in construction area, relevant to monitoring critical infrastructure projects with AP Sensing fiber optic sensing
Case Study Power Grid Monitoring
Jan 27, 2022
500 kV HVDC TPI & Power Cable Monitoring
AP Sensing’s Distributed Acoustic Sensing (DAS) technology was recently deployed by Korean Electric Power Corporation (KEPCO) to monitor the power cable link. The asset is a 500 kV HVDC transmission line, approximately 35 km in length. KEPCO decided to deploy AP Sensing’s DAS to monitor the asset and receive alerts in case of Third Party Interference (TPI) activities.
Electrical substation showcasing critical power assets monitored by AP Sensing solutions
Case Study Power Grid Monitoring
Nov 8, 2021
Third Party Intrusion & Power Cable Monitoring
AP Sensing’s technology was deployed by RTE to monitor a 225 kV underground power cable link located in the west of France. The link is approximately 39 km long and monitored for Third Party Intrusion (TPI) activities plus cable faults using our Distributed Acoustic Sensing (DAS) system, as well as hotspots using our Distributed Temperature Sensing (DTS) system. The power link installation is surrounded by frequent agricultural activities that pose no harm to the cable. To mitigate the risk of increased false alarms from these activities, similar events were simulated to test the system based on soil mixing and harvesting agricultural machines.
Renewable energy wind farm at sunset, representing assets suitable for AP Sensing fiber optic condition monitoring
Case Study Power Grid Monitoring
Mar 8, 2021
Power Cable Fault Detection & Location Analysis
For large power cable assets such as subsea cables, windfarm export cables or HV onshore transmission cables, finding cable faults rapidly is crucial to minimizing downtimes caused by these faults. Fiber optic Distributed Acoustic Sensing (DAS) is a key enabler for this task, as it pinpoints the exact location of an occurring cable fault if permanently installed or post-fault during thumping/flashover generation campaigns. The following examples summarize AP Sensing’s recent experience providing fault-finding services (both online and offline) with our DAS system.
AP Sensing provides fiber optic sensing for critical urban infrastructure protection and asset monitoring in city environments
Case Study Power Grid Monitoring
Feb 9, 2021
T&D network chooses AP Sensing's DTS + RTTR
AP Sensing’s Distributed Temperature Sensing (DTS) solution was selected in order for the T&D to maximize its assets and take advantage of the related operational cost savings with a noticeable improvement in the network’s efficiency.
AP Sensing fiber optic sensing protects critical infrastructure like railways and cable factories
Case Study Power Grid Monitoring
Feb 5, 2021
380 kV Underground Power Line Monitoring performed by AP Sensing
AP Sensing was selected by Brugg Kabel AG, a Swiss cable manufacturer, and SwissGrid, a Swiss transmission system operator, to monitor a newproject at the Gäbihübel in Switzerland. For this challenging task, a 12-channel Distributed Temperature Sensing (DTS) solution from AP Sensing was selected.
Protecting power grid assets with fiber optic monitoring solutions
Case Study Power Grid Monitoring
Jun 18, 2020
115kV Underground Power Cable Monitoring Saudi Arabia
Saudi Electricity Company (SEC) selected AP Sensing for a project monitoring two 115kV power circuits. Our technology provides not only the thermal profile of the power cables, but also insights into the actual conductor temperature and transient statuses with our Real Time Thermal Rating (RTTR) engine.
Monitor Gas Insulated Switchgear (GIS) and other critical power infrastructure assets with AP Sensing's sensing solutions
Case Study Power Grid Monitoring
May 13, 2020
Industrial Power Cable Monitoring Pakistan
AP Sensing is monitoring a 132 kV underground transmission cable for Karachi Electric. This cable experiences greater loads than nominal lines, as it feeds energy to a steel mill with high energy throughputs and frequent consumption cycles.
AP Sensing solution monitoring substation cables and transformers
Case Study Power Grid Monitoring
Mar 24, 2020
Power Cable Monitoring Using Acoustic Sensing
An AP Sensing Distributed Acoustic Sensing (DAS) system is monitoring a 6 km high-voltage power cable in Germany.
Offshore wind farm infrastructure, like these platforms, benefit from reliable AP Sensing monitoring systems
Case Study Power Grid Monitoring
Nov 13, 2019
AP Sensing's Role in Kriegers Flak Combined Grid Solution
Kriegers Flak is Denmark's largest offshore wind farm with a production capacity of just over 600 MW. AP Sensing is monitoring a total of 300 km of this asset, using 6 Distributed Temperature Sensing (DTS) units and 9 Distributed Acoustic Sensing (DAS) units.
Offshore wind farm infrastructure in the sea, requiring reliable fiber optic sensing solutions for asset monitoring
Case Study Power Grid Monitoring
Aug 21, 2019
Optical Fault Location and Temperature Monitoring of a 220 kV Power Cable
The Horns Rev 3 offshore wind farm, located off the west coast of Denmark, has a maximum installed power capacity of 400 MW. They chose AP Sensing for our unique combination of Distributed Temperature Sensing (DTS) and Distributed Acoustic Sensing (DAS) capabilities.
3
of
4

My Downloads

There are no documents in the download folder yet.

Use the to add new documents.

Your download has started.

Downloads

After you provide your details, we will send you the data selection digitally.